![Product top banner](https://ab-bhs-ca-3.abtra.ovh/static/lpwarehouse/images/top-banner.jpg)
![](https://cdn.abtra.com/lpwarehouse/attachments/vspfiles/photos/1206-4301-2.jpg)
1206-4301 36V 350A Ezgo W/o Plug
![Shipping image 0](https://ab-bhs-ca-3.abtra.ovh/static/lpwarehouse/images/banner-arrival-time.png)
![Shipping image 1](https://ab-bhs-ca-3.abtra.ovh/static/lpwarehouse/images/banner-guaranteed-fit.png)
![Shipping image 2](https://ab-bhs-ca-3.abtra.ovh/static/lpwarehouse/images/banner-international-shipping.png)
1206-4301 Curtis E-Z-GO 36V 350A Controller without Plug
Category: Curtis Model 1206
Product Description
This is a Curtis 36 Volt and 350 Amp SX Controller for E-Z-Go TXT and Medalist Golf Carts with Parts Number: 1206-4301 or Curtis 1206-4301.
Cross Reference Numbers:
- CL7007823
- CT1206-4301
- HU4067951
- YP550067818
- YP5500678-18
- 7007823
- 4067951
- 550067818
- 5500678-18
Suggested Accessories Parts Numbers:
76-1415-GOLF , 76-908HRNS48V , 76-908R3648BNJO , 94-CM174 , 100-586117111 , 24-CBHF2-EZ36 , 43-8012-30 , 76-1415-GOLF , 76-908HRNS48V , 76-908R3648BNJO , 94-CM174 , 100-586117111 , 24-CBHF2-EZ36 , 43-8012-30 , 76-1415-GOLF
Application: The Curtis 1206-4301 Controller works on E-Z-Go Medalist and TXT Carts with ITS Throttle, from 1994 to the present. This SX Motor Controller is not suitable for PDS or DCS Models.
Product Specifications
Specifications of the 1206-4301 E-Z-Go Controller:
Part Category | Cart Motor Speed Controller |
Brand | Curtis |
Drive System | New Curtis Master Drive |
Fitment | Direct Replacement |
Current | 350A |
Voltage | 36V |
Throttle Type | ITS Throttle Input |
Number of Pins | 5 |
Number of Plug Bars | 3 |
Weight | 2 lbs. |
Dimension | 6.5" x 4.5" x 2.5" |
Condition | Rebuilt |
Fitment | Direct Replacement |
Curtis 1206-4301 Controller
The 1206-4301 EZGO Controller is a remanufactured Motor Speed Controller for E-Z-Go TXT and Medalist Golf Carts. It is a 36V controller with ITS throttle. The 1206-4301 Controller is designed to replace the stock controllers on E-Z-Go 36V carts with ITS throttle only. It has an extra 50 Ampere than the stock controller which adds extra torque. It is responsible for regulating the speed level and performance of your vehicle while maintaining E-Z-Go safety standards.
![An image of a 1206-4301 Controller](/v/vspfiles/assets/images/1206-4301 Curtis E-Z-GO 36V 350A Controller.jpg)
![An image of a Curtis 1206-4301 E-Z-GO Controller (Top View 2)](/v/vspfiles/assets/images/Curtis 1206-4301 E-Z-GO 36V 350A Controller.jpg)
Figure: 1206MX-4301 E-Z-GO Controller1
Pre-installation Tests
Before installing the 1206-4301 Controller, you must conduct a set of tests defined in the instruction manual that comes with the controller. Upon installation, you may encounter problems that may be due to a faulty controller or a faulty cart. The following tests will help diagnose if the fault is a cart fault or controller fault.
CHECK MOTOR WINDINGS:
- Set your VOM to RESISTANCE (Ω).
- With your motor disconnected, measure A1 to A2. This must measure BETWEEN .3Ω and 1Ω.
- With your motor disconnected, measure F1 to F2. This must measure BETWEEN 1Ω and 2Ω.
- With your motor disconnected, measure A1 to F1. This must measure OPEN.
- With your motor disconnected, measure F1 to motor case. This must measure greater than 5MΩ.
CHECK MAIN SOLENOID:
- Disconnect all wires from the main solenoid.
- Set your VOM to RESISTANCE (Ω).
- Measure the solenoid coil. This must measure NO LESS than 100Ω.
- Connect VOM leads to the main solenoid lugs.
- Attach jumpers from the main battery positive and negative to the coil (small terminals).
- The meter must jump from infinity to LESS THAN .3Ω.
- Remove jumpers and reconnect solenoid wiring from the harness. (If suppression diode is present,
- The non-banded side must go the blue wire – pin J1-6 from the controller.)
CHECK COTHERM:
- Inspect the cotherm (insulating material) mounted to the heat sink for holes, debris, and tears.
- Repair or replace, if necessary.
CHECK THE CART WIRE HARNESS:
- Check the connectors on the wire harness for corrosion, loose, broken, burnt or missing pins.
- Repair or replace pins as necessary.
Warranty Information
The EZGO 1206-4301 Controller comes with a 6-months limited warranty, extendable up to 36 months.
Frequently Asked Questions
Is this Curtis 1206-4301 a new Controller?
No, the 1206-4301 EZGO Controller is a rebuilt item.
What is the current rating of the 1206-4301 Controller?
This Controller is rated at 350 Amps.
Does it work with PDS or DCS models?
This Controller does not work with PDS or DCS models. It only works with Medalist and TXT models (1994 to present).
Can it replace other 36V stock controllers with 300 Amps?
Yes, it can replace stock 300A controllers and thus provides extra torque.
Do I need to pay a core charge for the EZGO 1206-4301 Controller?
Yes, all remanufactured and rebuilt items are subject to a core charge. A core charge is refundable. The refund amount will be determined by the status of the core returned.
What kind of throttle does it use
The 1206-4301 uses ITS throttle.
How many Pins does it have?
It has 5 Pins in a 4+1 configuration.
Does it have 3 plug bars?
Yes, the 1206-4301 Controller does not have the 4th plug bar.
More Parts For EZGO Golf Cart
Beside Curtis 1206-4301 Controller, if you need More Electrical Parts for EZGO Golf Carts, we have a huge collection of
- ITS Converter
- RXV Bleeder
- 48V Ezgo LSV
- DCS Control
- Cart Battery Charger
- 36V Handle Cord
- 48V RXV DC Handle
- Charging Receptacle Repair Kit, and many more!
![An image of A part of E-Z-GO Golf Cart Parts collection at Lift Parts Warehouse](/v/vspfiles/assets/images/EZGO Electrical Parts.png)
Figure: A part of E-Z-GO Golf Cart Parts collection at Lift Parts Warehouse
Are you looking for something else? Please browse our Part Catalog here. Lift Parts Warehouse provides quality aftermarket parts at a very reasonable price. All parts come with a limited 1 Year Warranty. We also guarantee a 100% fit for our parts.
1The actual product may vary slightly in color and appearance. This image is for illustration purposes only.
Customer Reviews
You need to be logged in to submit a review.
Questions & Answers
Fetching questions...